Tuesday, 5 December 2017

[Linux] Use Wireshark in linux using tshark command

Installer WireShark

#> yum -y install wireshark





#> tshark





Manual of tshark command

TSHARK(1)                                                                                  The Wireshark Network Analyzer                                                                                 TSHARK(1)



NAME
       tshark - Dump and analyze network traffic

SYNOPSIS
       tshark [ -2 ] [ -a <capture autostop condition> ] ...  [ -b <capture ring buffer option>] ...  [ -B <capture buffer size> ]  [ -c <capture packet count> ] [ -C <configuration profile> ]
       [ -d <layer type>==<selector>,<decode-as protocol> ] [ -D ] [ -e <field> ] [ -E <field print option> ] [ -f <capture filter> ] [ -F <file format> ] [ -g ] [ -h ] [ -H <input hosts file> ]
       [ -i <capture interface>|- ] [ -I ] [ -K <keytab> ] [ -l ] [ -L ] [ -n ] [ -N <name resolving flags> ] [ -o <preference setting> ] ...  [ -O <protocols> ] [ -p ] [ -P ] [ -q ] [ -Q ] [ -r <infile> ]
       [ -R <Read filter> ] [ -Y <displaY filter> ] [ -s <capture snaplen> ] [ -S <separator> ] [ -t a|ad|d|dd|e|r|u|ud ] [ -T pdml|psml|ps|text|fields ] [ -v ] [ -V ] [ -w <outfile>|- ]
       [ -W <file format option>] [ -x ] [ -X <eXtension option>] [ -y <capture link type> ] [ -z <statistics> ] [ <capture filter> ]

       tshark -G [fields|protocols|values|decodes|defaultprefs|currentprefs]

DESCRIPTION
       TShark is a network protocol analyzer.  It lets you capture packet data from a live network, or read packets from a previously saved capture file, either printing a decoded form of those packets to the
       standard output or writing the packets to a file.  TShark's native capture file format is pcap format, which is also the format used by tcpdump and various other tools.

       Without any options set, TShark will work much like tcpdump.  It will use the pcap library to capture traffic from the first available network interface and displays a summary line on stdout for each
       received packet.

       TShark is able to detect, read and write the same capture files that are supported by Wireshark.  The input file doesn't need a specific filename extension; the file format and an optional gzip
       compression will be automatically detected.  Near the beginning of the DESCRIPTION section of wireshark(1) or <http://www.wireshark.org/docs/man-pages/wireshark.html> is a detailed description of the way
       Wireshark handles this, which is the same way Tshark handles this.

       Compressed file support uses (and therefore requires) the zlib library.  If the zlib library is not present, TShark will compile, but will be unable to read compressed files.

       If the -w option is not specified, TShark writes to the standard output the text of a decoded form of the packets it captures or reads.  If the -w option is specified, TShark writes to the file specified
       by that option the raw data of the packets, along with the packets' time stamps.

       When writing a decoded form of packets, TShark writes, by default, a summary line containing the fields specified by the preferences file (which are also the fields displayed in the packet list pane in
       Wireshark), although if it's writing packets as it captures them, rather than writing packets from a saved capture file, it won't show the "frame number" field.  If the -V option is specified, it writes
       instead a view of the details of the packet, showing all the fields of all protocols in the packet.  If the -O option is specified, it will only show the full protocols specified.  Use the output of
       "tshark -G protocols" to find the abbreviations of the protocols you can specify.

       If you want to write the decoded form of packets to a file, run TShark without the -w option, and redirect its standard output to the file (do not use the -w option).

       When writing packets to a file, TShark, by default, writes the file in pcap format, and writes all of the packets it sees to the output file.  The -F option can be used to specify the format in which to
       write the file.  This list of available file formats is displayed by the -F flag without a value.  However, you can't specify a file format for a live capture.

       Read filters in TShark, which allow you to select which packets are to be decoded or written to a file, are very powerful; more fields are filterable in TShark than in other protocol analyzers, and the
       syntax you can use to create your filters is richer.  As TShark progresses, expect more and more protocol fields to be allowed in read filters.

       Packet capturing is performed with the pcap library.  The capture filter syntax follows the rules of the pcap library.  This syntax is different from the read filter syntax.  A read filter can also be
       specified when capturing, and only packets that pass the read filter will be displayed or saved to the output file; note, however, that capture filters are much more efficient than read filters, and it
       may be more difficult for TShark to keep up with a busy network if a read filter is specified for a live capture.

       A capture or read filter can either be specified with the -f or -R option, respectively, in which case the entire filter expression must be specified as a single argument (which means that if it contains
       spaces, it must be quoted), or can be specified with command-line arguments after the option arguments, in which case all the arguments after the filter arguments are treated as a filter expression.
       Capture filters are supported only when doing a live capture; read filters are supported when doing a live capture and when reading a capture file, but require TShark to do more work when filtering, so
       you might be more likely to lose packets under heavy load if you're using a read filter.  If the filter is specified with command-line arguments after the option arguments, it's a capture filter if a
       capture is being done (i.e., if no -r option was specified) and a read filter if a capture file is being read (i.e., if a -r option was specified).

       The -G option is a special mode that simply causes Tshark to dump one of several types of internal glossaries and then exit.

OPTIONS
       -2  Perform a two-pass analysis. This causes tshark to buffer output until the entire first pass is done, but allows it to fill in fields that require future knowledge, such as 'response in frame #'
           fields. Also permits reassembly frame dependencies to be calculated correctly.

       -a  <capture autostop condition>
           Specify a criterion that specifies when TShark is to stop writing to a capture file.  The criterion is of the form test:value, where test is one of:

           duration:value Stop writing to a capture file after value seconds have elapsed.

           filesize:value Stop writing to a capture file after it reaches a size of value kB.  If this option is used together with the -b option, TShark will stop writing to the current capture file and switch
           to the next one if filesize is reached.  When reading a capture file, TShark will stop reading the file after the number of bytes read exceeds this number (the complete packet  will be read, so more
           bytes than this number may be read).  Note that the filesize is limited to a maximum value of 2 GiB.

           files:value Stop writing to capture files after value number of files were written.

       -b  <capture ring buffer option>
           Cause TShark to run in "multiple files" mode.  In "multiple files" mode, TShark will write to several capture files.  When the first capture file fills up, TShark will switch writing to the next file
           and so on.

           The created filenames are based on the filename given with the -w option, the number of the file and on the creation date and time, e.g. outfile_00001_20050604120117.pcap,
           outfile_00002_20050604120523.pcap, ...

           With the files option it's also possible to form a "ring buffer".  This will fill up new files until the number of files specified, at which point TShark will discard the data in the first file and
           start writing to that file and so on.  If the files option is not set, new files filled up until one of the capture stop conditions match (or until the disk is full).

           The criterion is of the form key:value, where key is one of:

           duration:value switch to the next file after value seconds have elapsed, even if the current file is not completely filled up.

           filesize:value switch to the next file after it reaches a size of value kB.  Note that the filesize is limited to a maximum value of 2 GiB.

           files:value begin again with the first file after value number of files were written (form a ring buffer).  This value must be less than 100000.  Caution should be used when using large numbers of
           files: some filesystems do not handle many files in a single directory well.  The files criterion requires either duration or filesize to be specified to control when to go to the next file.  It
           should be noted that each -b parameter takes exactly one criterion; to specify two criterion, each must be preceded by the -b option.

           Example: -b filesize:1000 -b files:5 results in a ring buffer of five files of size one megabyte each.

       -B  <capture buffer size>
           Set capture buffer size (in MiB, default is 4 MiB).  This is used by the capture driver to buffer packet data until that data can be written to disk.  If you encounter packet drops while capturing,
           try to increase this size.  Note that, while Tshark attempts to set the buffer size to 4 MiB by default, and can be told to set it to a larger value, the system or interface on which you're capturing
           might silently limit the capture buffer size to a lower value or raise it to a higher value.

           This is available on UNIX systems with libpcap 1.0.0 or later and on Windows.  It is not available on UNIX systems with earlier versions of libpcap.

           This option can occur multiple times.  If used before the first occurrence of the -i option, it sets the default capture buffer size.  If used after an -i option, it sets the capture buffer size for
           the interface specified by the last -i option occurring before this option.  If the capture buffer size is not set specifically, the default capture buffer size is used instead.

       -c  <capture packet count>
           Set the maximum number of packets to read when capturing live data.  If reading a capture file, set the maximum number of packets to read.

       -C  <configuration profile>
           Run with the given configuration profile.

       -d  <layer type>==<selector>,<decode-as protocol>
           Like Wireshark's Decode As... feature, this lets you specify how a layer type should be dissected.  If the layer type in question (for example, tcp.port or udp.port for a TCP or UDP port number) has
           the specified selector value, packets should be dissected as the specified protocol.

           Example: -d tcp.port==8888,http will decode any traffic running over TCP port 8888 as HTTP.

           Example: -d tcp.port==8888:3,http will decode any traffic running over TCP ports 8888, 8889 or 8890 as HTTP.

           Example: -d tcp.port==8888-8890,http will decode any traffic running over TCP ports 8888, 8889 or 8890 as HTTP.

           Using an invalid selector or protocol will print out a list of valid selectors and protocol names, respectively.

           Example: -d . is a quick way to get a list of valid selectors.

           Example: -d ethertype==0x0800. is a quick way to get a list of protocols that can be selected with an ethertype.

       -D  Print a list of the interfaces on which TShark can capture, and exit.  For each network interface, a number and an interface name, possibly followed by a text description of the interface, is printed.
           The interface name or the number can be supplied to the -i option to specify an interface on which to capture.

           This can be useful on systems that don't have a command to list them (e.g., Windows systems, or UNIX systems lacking ifconfig -a); the number can be useful on Windows 2000 and later systems, where the
           interface name is a somewhat complex string.

           Note that "can capture" means that TShark was able to open that device to do a live capture.  Depending on your system you may need to run tshark from an account with special privileges (for example,
           as root) to be able to capture network traffic.  If TShark -D is not run from such an account, it will not list any interfaces.

       -e  <field>
           Add a field to the list of fields to display if -T fields is selected.  This option can be used multiple times on the command line.  At least one field must be provided if the -T fields option is
           selected. Column names may be used prefixed with "col."

           Example: -e frame.number -e ip.addr -e udp -e col.info

           Giving a protocol rather than a single field will print multiple items of data about the protocol as a single field.  Fields are separated by tab characters by default.  -E controls the format of the
           printed fields.

       -E  <field print option>
           Set an option controlling the printing of fields when -T fields is selected.

           Options are:

           header=y|n If y, print a list of the field names given using -e as the first line of the output; the field name will be separated using the same character as the field values.  Defaults to n.

           separator=/t|/s|<character> Set the separator character to use for fields.  If /t tab will be used (this is the default), if /s, a single space will be used.  Otherwise any character that can be
           accepted by the command line as part of the option may be used.

           occurrence=f|l|a Select which occurrence to use for fields that have multiple occurrences.  If f the first occurrence will be used, if l the last occurrence will be used and if a all occurrences will
           be used (this is the default).

           aggregator=,|/s|<character> Set the aggregator character to use for fields that have multiple occurrences.  If , a comma will be used (this is the default), if /s, a single space will be used.
           Otherwise any character that can be accepted by the command line as part of the option may be used.

           quote=d|s|n Set the quote character to use to surround fields.  d uses double-quotes, s single-quotes, n no quotes (the default).

       -f  <capture filter>
           Set the capture filter expression.

           This option can occur multiple times.  If used before the first occurrence of the -i option, it sets the default capture filter expression.  If used after an -i option, it sets the capture filter
           expression for the interface specified by the last -i option occurring before this option.  If the capture filter expression is not set specifically, the default capture filter expression is used if
           provided.

       -F  <file format>
           Set the file format of the output capture file written using the -w option.  The output written with the -w option is raw packet data, not text, so there is no -F option to request text output.  The
           option -F without a value will list the available formats.

       -g  This option causes the output file(s) to be created with group-read permission (meaning that the output file(s) can be read by other members of the calling user's group).

       -G  [fields|protocols|values|decodes|defaultprefs|currentprefs]
           The -G option will cause Tshark to dump one of several types of glossaries and then exit.  If no specific glossary type is specified, then the fields report will be generated by default.

           The available report types include:

           fields  Dumps the contents of the registration database to stdout.  An independent program can take this output and format it into nice tables or HTML or whatever.  There is one record per line.  Each
           record is either a protocol or a header field, differentiated by the first field.  The fields are tab-delimited.

            * Protocols
            * ---------
            * Field 1 = 'P'
            * Field 2 = descriptive protocol name
            * Field 3 = protocol abbreviation
            *
            * Header Fields
            * -------------
            * Field 1 = 'F'
            * Field 2 = descriptive field name
            * Field 3 = field abbreviation
            * Field 4 = type ( textual representation of the ftenum type )
            * Field 5 = parent protocol abbreviation
            * Field 6 = base for display (for integer types); "parent bitfield width" for FT_BOOLEAN
            * Field 7 = bitmask: format: hex: 0x....
            * Field 8 = blurb describing field

           protocols Dumps the protocols in the registration database to stdout.  An independent program can take this output and format it into nice tables or HTML or whatever.  There is one record per line.
           The fields are tab-delimited.

            * Field 1 = protocol name
            * Field 2 = protocol short name
            * Field 3 = protocol filter name

           values Dumps the value_strings, range_strings or true/false strings for fields that have them.  There is one record per line.  Fields are tab-delimited.  There are three types of records: Value
           String, Range String and True/False String.  The first field, 'V', 'R' or 'T', indicates the type of record.

            * Value Strings
            * -------------
            * Field 1 = 'V'
            * Field 2 = field abbreviation to which this value string corresponds
            * Field 3 = Integer value
            * Field 4 = String
            *
            * Range Strings
            * -------------
            * Field 1 = 'R'
            * Field 2 = field abbreviation to which this range string corresponds
            * Field 3 = Integer value: lower bound
            * Field 4 = Integer value: upper bound
            * Field 5 = String
            *
            * True/False Strings
            * ------------------
            * Field 1 = 'T'
            * Field 2 = field abbreviation to which this true/false string corresponds
            * Field 3 = True String
            * Field 4 = False String

           decodes Dumps the "layer type"/"decode as" associations to stdout.  There is one record per line.  The fields are tab-delimited.

            * Field 1 = layer type, e.g. "tcp.port"
            * Field 2 = selector in decimal
            * Field 3 = "decode as" name, e.g. "http"

           defaultprefs  Dumps a default preferences file to stdout.

           currentprefs  Dumps a copy of the current preferences file to stdout.

       -h  Print the version and options and exits.

       -H  <input hosts file>
           Read a list of entries from a "hosts" file, which will then be written to a capture file.  Implies -W n. Can be called multiple times.

           The "hosts" file format is documented at <http://en.wikipedia.org/wiki/Hosts_(file)>.

       -i  <capture interface> | -
           Set the name of the network interface or pipe to use for live packet capture.

           Network interface names should match one of the names listed in "tshark -D" (described above); a number, as reported by "tshark -D", can also be used.  If you're using UNIX, "netstat -i" or "ifconfig
           -a" might also work to list interface names, although not all versions of UNIX support the -a option to ifconfig.

           If no interface is specified, TShark searches the list of interfaces, choosing the first non-loopback interface if there are any non-loopback interfaces, and choosing the first loopback interface if
           there are no non-loopback interfaces.  If there are no interfaces at all, TShark reports an error and doesn't start the capture.

           Pipe names should be either the name of a FIFO (named pipe) or ``-'' to read data from the standard input.  Data read from pipes must be in standard pcap format.

           This option can occur multiple times.  When capturing from multiple interfaces, the capture file will be saved in pcap-ng format.

           Note: the Win32 version of TShark doesn't support capturing from pipes!

       -I  Put the interface in "monitor mode"; this is supported only on IEEE 802.11 Wi-Fi interfaces, and supported only on some operating systems.

           Note that in monitor mode the adapter might disassociate from the network with which it's associated, so that you will not be able to use any wireless networks with that adapter.  This could prevent
           accessing files on a network server, or resolving host names or network addresses, if you are capturing in monitor mode and are not connected to another network with another adapter.

           This option can occur multiple times.  If used before the first occurrence of the -i option, it enables the monitor mode for all interfaces.  If used after an -i option, it enables the monitor mode
           for the interface specified by the last -i option occurring before this option.

       -K  <keytab>
           Load kerberos crypto keys from the specified keytab file.  This option can be used multiple times to load keys from several files.

           Example: -K krb5.keytab

       -l  Flush the standard output after the information for each packet is printed.  (This is not, strictly speaking, line-buffered if -V was specified; however, it is the same as line-buffered if -V wasn't
           specified, as only one line is printed for each packet, and, as -l is normally used when piping a live capture to a program or script, so that output for a packet shows up as soon as the packet is
           seen and dissected, it should work just as well as true line-buffering.  We do this as a workaround for a deficiency in the Microsoft Visual C++ C library.)

           This may be useful when piping the output of TShark to another program, as it means that the program to which the output is piped will see the dissected data for a packet as soon as TShark sees the
           packet and generates that output, rather than seeing it only when the standard output buffer containing that data fills up.

       -L  List the data link types supported by the interface and exit.  The reported link types can be used for the -y option.

       -n  Disable network object name resolution (such as hostname, TCP and UDP port names); the -N flag might override this one.

       -N  <name resolving flags>
           Turn on name resolving only for particular types of addresses and port numbers, with name resolving for other types of addresses and port numbers turned off.  This flag overrides -n if both -N and -n
           are present.  If both -N and -n flags are not present, all name resolutions are turned on.

           The argument is a string that may contain the letters:

           m to enable MAC address resolution

           n to enable network address resolution

           N to enable using external resolvers (e.g., DNS) for network address resolution

           t to enable transport-layer port number resolution

           C to enable concurrent (asynchronous) DNS lookups

       -o  <preference>:<value>
           Set a preference value, overriding the default value and any value read from a preference file.  The argument to the option is a string of the form prefname:value, where prefname is the name of the
           preference (which is the same name that would appear in the preference file), and value is the value to which it should be set.

       -O  <protocols>
           Similar to the -V option, but causes TShark to only show a detailed view of the comma-separated list of protocols specified, rather than a detailed view of all protocols.  Use the output of "tshark -G
           protocols" to find the abbreviations of the protocols you can specify.

       -p  Don't put the interface into promiscuous mode.  Note that the interface might be in promiscuous mode for some other reason; hence, -p cannot be used to ensure that the only traffic that is captured is
           traffic sent to or from the machine on which TShark is running, broadcast traffic, and multicast traffic to addresses received by that machine.

           This option can occur multiple times.  If used before the first occurrence of the -i option, no interface will be put into the promiscuous mode.  If used after an -i option, the interface specified by
           the last -i option occurring before this option will not be put into the promiscuous mode.

       -P  Decode and display the packet summary, even if writing raw packet data using the -w option.

       -q  When capturing packets, don't display the continuous count of packets captured that is normally shown when saving a capture to a file; instead, just display, at the end of the capture, a count of
           packets captured.  On systems that support the SIGINFO signal, such as various BSDs, you can cause the current count to be displayed by typing your "status" character (typically control-T, although it
           might be set to "disabled" by default on at least some BSDs, so you'd have to explicitly set it to use it).

           When reading a capture file, or when capturing and not saving to a file, don't print packet information; this is useful if you're using a -z option to calculate statistics and don't want the packet
           information printed, just the statistics.

       -Q  When capturing packets, only display true errors.  This outputs less than the -q option, so the interface name and total packet count and the end of a capture are not sent to stderr.

       -r  <infile>
           Read packet data from infile, can be any supported capture file format (including gzipped files).  It's not possible to use named pipes or stdin here!

       -R  <Read filter>
           Cause the specified filter (which uses the syntax of read/display filters, rather than that of capture filters) to be applied during the first pass of analysis. Packets not matching the filter are not
           considered for future passes. Only makes sense with multiple passes, see -2. For regular filtering on single-pass dissect see -Y instead.

           Note that forward-looking fields such as 'response in frame #' cannot be used with this filter, since they will not have been calculate when this filter is applied.

       -Y  <displaY filter>
           Cause the specified filter (which uses the syntax of read/display filters, rather than that of capture filters) to be applied before printing a decoded form of packets or writing packets to a file.
           Packets matching the filter are printed or written to file; packets that the matching packets depend upon (e.g., fragments), are not printed but are written to file; packets not matching the filter
           nor depended upon are discarded rather than being printed or written.

           Use this instead of -R for filtering using single-pass analysis. If doing two-pass analysis (see -2) then only packets matching the read filter (if there is one) will be checked against this filter.

       -s  <capture snaplen>
           Set the default snapshot length to use when capturing live data.  No more than snaplen bytes of each network packet will be read into memory, or saved to disk.  A value of 0 specifies a snapshot
           length of 262144, so that the full packet is captured; this is the default.

           This option can occur multiple times.  If used before the first occurrence of the -i option, it sets the default snapshot length.  If used after an -i option, it sets the snapshot length for the
           interface specified by the last -i option occurring before this option.  If the snapshot length is not set specifically, the default snapshot length is used if provided.

       -S  <separator>
           Set the line separator to be printed between packets.

       -t  a|ad|d|dd|e|r|u|ud
           Set the format of the packet timestamp printed in summary lines.  The format can be one of:

           a absolute: The absolute time is the actual time the packet was captured, with no date displayed

           ad absolute with date: The absolute date and time is the actual time and date the packet was captured

           d delta: The delta time is the time since the previous packet was captured

           dd delta_displayed: The delta_displayed time is the time since the previous displayed packet was captured

           e epoch: The time in seconds since epoch (Jan 1, 1970 00:00:00)

           r relative: The relative time is the time elapsed between the first packet and the current packet

           u UTC: The UTC time is the actual time the packet was captured, with no date displayed

           ud UTC with date: The UTC date and time is the actual time and date the packet was captured

           The default format is relative.

       -T  pdml|psml|ps|text|fields
           Set the format of the output when viewing decoded packet data.  The options are one of:

           pdml Packet Details Markup Language, an XML-based format for the details of a decoded packet.  This information is equivalent to the packet details printed with the -V flag.

           psml Packet Summary Markup Language, an XML-based format for the summary information of a decoded packet.  This information is equivalent to the information shown in the one-line summary printed by
           default.

           ps PostScript for a human-readable one-line summary of each of the packets, or a multi-line view of the details of each of the packets, depending on whether the -V flag was specified.

           text Text of a human-readable one-line summary of each of the packets, or a multi-line view of the details of each of the packets, depending on whether the -V flag was specified.  This is the default.

           fields The values of fields specified with the -e option, in a form specified by the -E option.  For example,

             -T fields -E separator=, -E quote=d

           would generate comma-separated values (CSV) output suitable for importing into your favorite spreadsheet program.

       -v  Print the version and exit.

       -V  Cause TShark to print a view of the packet details.

       -w  <outfile> | -
           Write raw packet data to outfile or to the standard output if outfile is '-'.

           NOTE: -w provides raw packet data, not text.  If you want text output you need to redirect stdout (e.g. using '>'), don't use the -w option for this.

       -W  <file format option>
           Save extra information in the file if the format supports it.  For example,

             -F pcapng -W n

           will save host name resolution records along with captured packets.

           Future versions of Wireshark may automatically change the capture format to pcapng as needed.

           The argument is a string that may contain the following letter:

           n write network address resolution information (pcapng only)

       -x  Cause TShark to print a hex and ASCII dump of the packet data after printing the summary and/or details, if either are also being displayed.

       -X <eXtension options>
           Specify an option to be passed to a TShark module.  The eXtension option is in the form extension_key:value, where extension_key can be:

           lua_script:lua_script_filename tells Wireshark to load the given script in addition to the default Lua scripts.

       -y  <capture link type>
           Set the data link type to use while capturing packets.  The values reported by -L are the values that can be used.

           This option can occur multiple times.  If used before the first occurrence of the -i option, it sets the default capture link type.  If used after an -i option, it sets the capture link type for the
           interface specified by the last -i option occurring before this option.  If the capture link type is not set specifically, the default capture link type is used if provided.

       -z  <statistics>
           Get TShark to collect various types of statistics and display the result after finishing reading the capture file.  Use the -q flag if you're reading a capture file and only want the statistics
           printed, not any per-packet information.

           Note that the -z proto option is different - it doesn't cause statistics to be gathered and printed when the capture is complete, it modifies the regular packet summary output to include the values of
           fields specified with the option.  Therefore you must not use the -q option, as that option would suppress the printing of the regular packet summary output, and must also not use the -V option, as
           that would cause packet detail information rather than packet summary information to be printed.

           Currently implemented statistics are:

           -z help
               Display all possible values for -z.

           -z afp,srt[,filter]
           -z camel,srt
           -z compare,start,stop,ttl[0|1],order[0|1],variance[,filter]
               If the optional filter is specified, only those packets that match the filter will be used in the calculations.

           -z conv,type[,filter]
               Create a table that lists all conversations that could be seen in the capture.  type specifies the conversation endpoint types for which we want to generate the statistics; currently the supported
               ones are:

                 "eth"   Ethernet addresses
                 "fc"    Fibre Channel addresses
                 "fddi"  FDDI addresses
                 "ip"    IPv4 addresses
                 "ipv6"  IPv6 addresses
                 "ipx"   IPX addresses
                 "tcp"   TCP/IP socket pairs  Both IPv4 and IPv6 are supported
                 "tr"    Token Ring addresses
                 "udp"   UDP/IP socket pairs  Both IPv4 and IPv6 are supported

               If the optional filter is specified, only those packets that match the filter will be used in the calculations.

               The table is presented with one line for each conversation and displays the number of packets/bytes in each direction as well as the total number of packets/bytes.  The table is sorted according
               to the total number of frames.

           -z dcerpc,srt,uuid,major.minor[,filter]
               Collect call/reply SRT (Service Response Time) data for DCERPC interface uuid, version major.minor.  Data collected is the number of calls for each procedure, MinSRT, MaxSRT and AvgSRT.

               Example: -z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0 will collect data for the CIFS SAMR Interface.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0,ip.addr==1.2.3.4 will collect SAMR SRT statistics for a specific host.

           -z diameter,avp[,cmd.code,field,field,...]
               This option enables extraction of most important diameter fields from large capture files.  Exactly one text line for each diameter message with matched diameter.cmd.code will be printed.

               Empty diameter command code or '*' can be specified to mach any diameter.cmd.code

               Example: -z diameter,avp  extract default field set from diameter messages.

               Example: -z diameter,avp,280  extract default field set from diameter DWR messages.

               Example: -z diameter,avp,272  extract default field set from diameter CC messages.

               Extract most important fields from diameter CC messages:

               tshark -r file.cap.gz -q -z diameter,avp,272,CC-Request-Type,CC-Request-Number,Session-Id,Subscription-Id-Data,Rating-Group,Result-Code

               Following fields will be printed out for each diameter message:

                 "frame"        Frame number.
                 "time"         Unix time of the frame arrival.
                 "src"          Source address.
                 "srcport"      Source port.
                 "dst"          Destination address.
                 "dstport"      Destination port.
                 "proto"        Constant string 'diameter', which can be used for post processing of tshark output.  E.g. grep/sed/awk.
                 "msgnr"        seq. number of diameter message within the frame.  E.g. '2' for the third diameter message in the same frame.
                 "is_request"   '0' if message is a request, '1' if message is an answer.
                 "cmd"          diameter.cmd_code, E.g. '272' for credit control messages.
                 "req_frame"    Number of frame where matched request was found or '0'.
                 "ans_frame"    Number of frame where matched answer was found or '0'.
                 "resp_time"    response time in seconds, '0' in case if matched Request/Answer is not found in trace.  E.g. in the begin or end of capture.

               -z diameter,avp option is much faster than -V -T text or -T pdml options.

               -z diameter,avp option is more powerful than -T field and -z proto,colinfo options.

               Multiple diameter messages in one frame are supported.

               Several fields with same name within one diameter message are supported, e.g. diameter.Subscription-Id-Data or diameter.Rating-Group.

               Note: tshark -q option is recommended to suppress default tshark output.

           -z expert[,error|,warn|,note|,chat][,filter]
               Collects information about all expert info, and will display them in order, grouped by severity.

               Example: -z expert,sip will show expert items of all severity for frames that match the sip protocol.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z "expert,note,tcp" will only collect expert items for frames that include the tcp protocol, with a severity of note or higher.

           -z follow,prot,mode,filter[,range]
               Displays the contents of a TCP or UDP stream between two nodes.  The data sent by the second node is prefixed with a tab to differentiate it from the data sent by the first node.

               prot specifies the transport protocol.  It can be one of:
                 tcp   TCP
                 udp   UDP
                 ssl   SSL

               mode specifies the output mode.  It can be one of:
                 ascii ASCII output with dots for non-printable characters
                 hex   Hexadecimal and ASCII data with offsets
                 raw   Hexadecimal data

               Since the output in ascii mode may contain newlines, the length of each section of output plus a newline precedes each section of output.

               filter specifies the stream to be displayed.  UDP streams are selected with IP address plus port pairs.  TCP streams are selected with either the stream index or IP address plus port pairs.  For
               example:
                 ip-addr0:port0,ip-addr1:port1
                 tcp-stream-index

               range optionally specifies which "chunks" of the stream should be displayed.

               Example: -z "follow,tcp,hex,1" will display the contents of the first TCP stream in "hex" format.

                 ===================================================================
                 Follow: tcp,hex
                 Filter: tcp.stream eq 1
                 Node 0: 200.57.7.197:32891
                 Node 1: 200.57.7.198:2906
                 00000000  00 00 00 22 00 00 00 07  00 0a 85 02 07 e9 00 02  ...".... ........
                 00000010  07 e9 06 0f 00 0d 00 04  00 00 00 01 00 03 00 06  ........ ........
                 00000020  1f 00 06 04 00 00                                 ......
                     00000000  00 01 00 00                                       ....
                     00000026  00 02 00 00

               Example: -z "follow,tcp,ascii,200.57.7.197:32891,200.57.7.198:2906" will display the contents of a TCP stream between 200.57.7.197 port 32891 and 200.57.7.98 port 2906.

                 ===================================================================
                 Follow: tcp,ascii
                 Filter: (ommitted for readability)
                 Node 0: 200.57.7.197:32891
                 Node 1: 200.57.7.198:2906
                 38
                 ...".....
                 ................
                     4
                     ....

           -z h225,counter[,filter]
               Count ITU-T H.225 messages and their reasons.  In the first column you get a list of H.225 messages and H.225 message reasons, which occur in the current capture file.  The number of occurrences
               of each message or reason is displayed in the second column.

               Example: -z h225,counter.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.  Example: use -z "h225,counter,ip.addr==1.2.3.4" to only collect stats for H.225
               packets exchanged by the host at IP address 1.2.3.4 .

               This option can be used multiple times on the command line.

           -z h225,srt[,filter]
               Collect requests/response SRT (Service Response Time) data for ITU-T H.225 RAS.  Data collected is number of calls of each ITU-T H.225 RAS Message Type, Minimum SRT, Maximum SRT, Average SRT,
               Minimum in Packet, and Maximum in Packet.  You will also get the number of Open Requests (Unresponded Requests), Discarded Responses (Responses without matching request) and Duplicate Messages.

               Example: -z h225,srt

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z "h225,srt,ip.addr==1.2.3.4" will only collect stats for ITU-T H.225 RAS packets exchanged by the host at IP address 1.2.3.4 .

           -z hosts[,ipv4][,ipv6]
               Dump any collected IPv4 and/or IPv6 addresses in "hosts" format.  Both IPv4 and IPv6 addresses are dumped by default.

               Addresses are collected from a number of sources, including standard "hosts" files and captured traffic.

           -z http,stat,
               Calculate the HTTP statistics distribution. Displayed values are the HTTP status codes and the HTTP request methods.

           -z http,tree
               Calculate the HTTP packet distribution. Displayed values are the HTTP request modes and the HTTP status codes.

           -z http_req,tree
               Calculate the HTTP requests by server. Displayed values are the server name and the URI path.

           -z http_srv,tree
               Calculate the HTTP requests and responses by server. For the HTTP requests, displayed values are the server IP address and server hostname. For the HTTP responses, displayed values are the server
               IP address and status.

           -z icmp,srt[,filter]
               Compute total ICMP echo requests, replies, loss, and percent loss, as well as minimum, maximum, mean, median and sample standard deviation SRT statistics typical of what ping provides.

               Example: -z icmp,srt,ip.src==1.2.3.4 will collect ICMP SRT statistics for ICMP echo request packets originating from a specific host.

               This option can be used multiple times on the command line.

           -z icmpv6,srt[,filter]
               Compute total ICMPv6 echo requests, replies, loss, and percent loss, as well as minimum, maximum, mean, median and sample standard deviation SRT statistics typical of what ping provides.

               Example: -z icmpv6,srt,ipv6.src==fe80::1 will collect ICMPv6 SRT statistics for ICMPv6 echo request packets originating from a specific host.

               This option can be used multiple times on the command line.

           -z io,phs[,filter]
               Create Protocol Hierarchy Statistics listing both number of packets and bytes.  If no filter is specified the statistics will be calculated for all packets.  If a filter is specified statistics
               will only be calculated for those packets that match the filter.

               This option can be used multiple times on the command line.

           -z io,stat,interval[,filter][,filter][,filter]...
               Collect packet/bytes statistics for the capture in intervals of interval seconds.  Interval can be specified either as a whole or fractional second and can be specified with microsecond (us)
               resolution.  If interval is 0, the statistics will be calculated over all packets.

               If no filter is specified the statistics will be calculated for all packets.  If one or more filters are specified statistics will be calculated for all filters and presented with one column of
               statistics for each filter.

               This option can be used multiple times on the command line.

               Example: -z io,stat,1,ip.addr==1.2.3.4 will generate 1 second statistics for all traffic to/from host 1.2.3.4.

               Example: -z "io,stat,0.001,smb&&ip.addr==1.2.3.4" will generate 1ms statistics for all SMB packets to/from host 1.2.3.4.

               The examples above all use the standard syntax for generating statistics which only calculates the number of packets and bytes in each interval.

               io,stat can also do much more statistics and calculate COUNT(), SUM(), MIN(), MAX(), AVG() and LOAD() using a slightly different filter syntax:

           -z io,stat,interval,"[COUNT|SUM|MIN|MAX|AVG|LOAD](field)field [and filter]"
               NOTE: One important thing to note here is that the field that the calculation is based on MUST also be part of the filter string or else the calculation will fail.

               So: -z io,stat,0.010,AVG(smb.time) does not work.  Use -z io,stat,0.010,AVG(smb.time)smb.time instead.  Also be aware that a field can exist multiple times inside the same packet and will then be
               counted multiple times in those packets.

               NOTE: A second important thing to note is that the system setting for decimal separator is set to "."! If it is set to "," the statistics will not be displayed per filter.

               COUNT(field)field [and filter] - Calculates the number of times that the field name (not its value) appears per interval in the filtered packet list.  ''field'' can be any display filter name.

               Example: -z io,stat,0.010,"COUNT(smb.sid)smb.sid"

               This will count the total number of SIDs seen in each 10ms interval.

               SUM(field)field [and filter] - Unlike COUNT, the values of the specified field are summed per time interval.  ''field'' can only be a named integer, float, double or relative time field.

               Example: -z io,stat,0.010,"SUM(frame.len)frame.len"

               Reports the total number of bytes that were transmitted bidirectionally in all the packets within a 10 millisecond interval.

               MIN/MAX/AVG(field)field [and filter] - The minimum, maximum, or average field value in each interval is calculated.  The specified field must be a named integer, float, double or relative time
               field.  For relative time fields, the output is presented in seconds with six decimal digits of precision rounded to the nearest microsecond.

               In the following example, the time of the first Read_AndX call, the last Read_AndX response values are displayed and the minimum, maximum, and average Read response times (SRTs) are calculated.
               NOTE: If the DOS command shell line continuation character, ''^'' is used, each line cannot end in a comma so it is placed at the beginning of each continuation line:

                 tshark -o tcp.desegment_tcp_streams:FALSE -n -q -r smb_reads.cap -z io,stat,0,
                 "MIN(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==0",
                 "MAX(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==1",
                 "MIN(smb.time)smb.time and smb.cmd==0x2e",
                 "MAX(smb.time)smb.time and smb.cmd==0x2e",
                 "AVG(smb.time)smb.time and smb.cmd==0x2e"


                 ======================================================================================================
                 IO Statistics
                 Column #0: MIN(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==0
                 Column #1: MAX(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==1
                 Column #2: MIN(smb.time)smb.time and smb.cmd==0x2e
                 Column #3: MAX(smb.time)smb.time and smb.cmd==0x2e
                 Column #4: AVG(smb.time)smb.time and smb.cmd==0x2e
                                 |    Column #0   |    Column #1   |    Column #2   |    Column #3   |    Column #4   |
                 Time            |       MIN      |       MAX      |       MIN      |       MAX      |       AVG      |
                 000.000-                 0.000000         7.704054         0.000072         0.005539         0.000295
                 ======================================================================================================

               The following command displays the average SMB Read response PDU size, the total number of read PDU bytes, the average SMB Write request PDU size, and the total number of bytes transferred in SMB
               Write PDUs:

                 tshark -n -q -r smb_reads_writes.cap -z io,stat,0,
                 "AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to",
                 "SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to",
                 "AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to",
                 "SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to"

                 =====================================================================================
                 IO Statistics
                 Column #0: AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to
                 Column #1: SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to
                 Column #2: AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to
                 Column #3: SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to
                                 |    Column #0   |    Column #1   |    Column #2   |    Column #3   |
                 Time            |       AVG      |       SUM      |       AVG      |       SUM      |
                 000.000-                    30018         28067522               72             3240
                 =====================================================================================

               LOAD(field)field [and filter] - The LOAD/Queue-Depth in each interval is calculated.  The specified field must be a relative time field that represents a response time.  For example smb.time.  For
               each interval the Queue-Depth for the specified protocol is calculated.

               The following command displays the average SMB LOAD.  A value of 1.0 represents one I/O in flight.

                 tshark -n -q -r smb_reads_writes.cap
                 -z "io,stat,0.001,LOAD(smb.time)smb.time"

                 ============================================================================
                 IO Statistics
                 Interval:   0.001000 secs
                 Column #0: LOAD(smb.time)smb.time
                                         |    Column #0   |
                 Time                    |       LOAD     |
                 0000.000000-0000.001000         1.000000
                 0000.001000-0000.002000         0.741000
                 0000.002000-0000.003000         0.000000
                 0000.003000-0000.004000         1.000000

               FRAMES | BYTES[()filter] - Displays the total number of frames or bytes.  The filter field is optional but if included it must be prepended with ''()''.

               The following command displays five columns: the total number of frames and bytes (transferred bidirectionally) using a single comma, the same two stats using the FRAMES and BYTES subcommands, the
               total number of frames containing at least one SMB Read response, and the total number of bytes transmitted to the client (unidirectionally) at IP address 10.1.0.64.

                 tshark -o tcp.desegment_tcp_streams:FALSE -n -q -r smb_reads.cap -z io,stat,0,,FRAMES,BYTES,
                 "FRAMES()smb.cmd==0x2e and smb.response_to","BYTES()ip.dst==10.1.0.64"

                 =======================================================================================================================
                 IO Statistics
                 Column #0:
                 Column #1: FRAMES
                 Column #2: BYTES
                 Column #3: FRAMES()smb.cmd==0x2e and smb.response_to
                 Column #4: BYTES()ip.dst==10.1.0.64
                                 |            Column #0            |    Column #1   |    Column #2   |    Column #3   |    Column #4   |
                 Time            |     Frames     |      Bytes     |     FRAMES     |     BYTES      |     FRAMES     |     BYTES      |
                 000.000-                    33576         29721685            33576         29721685              870         29004801
                 =======================================================================================================================

           -z mac-lte,stat[,filter]
               This option will activate a counter for LTE MAC messages.  You will get information about the maximum number of UEs/TTI, common messages and various counters for each UE that appears in the log.

               Example: -z mac-lte,stat.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated for those frames that match that filter.  Example: -z "mac-lte,stat,mac-lte.rnti3000"> will only collect stats for UEs with an
               assigned RNTI whose value is more than 3000.

           -z megaco,rtd[,filter]
               Collect requests/response RTD (Response Time Delay) data for MEGACO.  (This is similar to -z smb,srt).  Data collected is the number of calls for each known MEGACO Type, MinRTD, MaxRTD and AvgRTD.
               Additionally you get the number of duplicate requests/responses, unresponded requests, responses, which don't match with any request.  Example: -z megaco,rtd.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.  Example: -z "megaco,rtd,ip.addr==1.2.3.4" will only collect stats for MEGACO packets
               exchanged by the host at IP address 1.2.3.4 .

               This option can be used multiple times on the command line.

           -z mgcp,rtd[,filter]
               Collect requests/response RTD (Response Time Delay) data for MGCP.  (This is similar to -z smb,srt).  Data collected is the number of calls for each known MGCP Type, MinRTD, MaxRTD and AvgRTD.
               Additionally you get the number of duplicate requests/responses, unresponded requests, responses, which don't match with any request.  Example: -z mgcp,rtd.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.  Example: -z "mgcp,rtd,ip.addr==1.2.3.4" will only collect stats for MGCP packets
               exchanged by the host at IP address 1.2.3.4 .

           -z proto,colinfo,filter,field
               Append all field values for the packet to the Info column of the one-line summary output.  This feature can be used to append arbitrary fields to the Info column in addition to the normal content
               of that column.  field is the display-filter name of a field which value should be placed in the Info column.  filter is a filter string that controls for which packets the field value will be
               presented in the info column.  field will only be presented in the Info column for the packets which match filter.

               NOTE: In order for TShark to be able to extract the field value from the packet, field MUST be part of the filter string.  If not, TShark will not be able to extract its value.

               For a simple example to add the "nfs.fh.hash" field to the Info column for all packets containing the "nfs.fh.hash" field, use

               -z proto,colinfo,nfs.fh.hash,nfs.fh.hash

               To put "nfs.fh.hash" in the Info column but only for packets coming from host 1.2.3.4 use:

               -z "proto,colinfo,nfs.fh.hash && ip.src==1.2.3.4,nfs.fh.hash"

               This option can be used multiple times on the command line.

           -z rlc-lte,stat[,filter]
               This option will activate a counter for LTE RLC messages.  You will get information about common messages and various counters for each UE that appears in the log.

               Example: -z rlc-lte,stat.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated for those frames that match that filter.  Example: -z "rlc-lte,stat,rlc-lte.ueid3000"> will only collect stats for UEs with a
               UEId of more than 3000.

           -z rpc,programs
               Collect call/reply SRT data for all known ONC-RPC programs/versions.  Data collected is number of calls for each protocol/version, MinSRT, MaxSRT and AvgSRT.  This option can only be used once on
               the command line.

           -z rpc,srt,program,version[,filter]
               Collect call/reply SRT (Service Response Time) data for program/version.  Data collected is number of calls for each procedure, MinSRT, MaxSRT and AvgSRT.

               Example: -z rpc,srt,100003,3 will collect data for NFS v3.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z rpc,srt,100003,3,nfs.fh.hash==0x12345678 will collect NFS v3 SRT statistics for a specific file.

           -z rtp,streams
               Collect statistics for all RTP streams and calculate max. delta, max. and mean jitter and packet loss percentages.

           -z scsi,srt,cmdset[,filter]
               Collect call/reply SRT (Service Response Time) data for SCSI commandset cmdset.

               Commandsets are 0:SBC   1:SSC  5:MMC

               Data collected is the number of calls for each procedure, MinSRT, MaxSRT and AvgSRT.

               Example: -z scsi,srt,0 will collect data for SCSI BLOCK COMMANDS (SBC).

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z scsi,srt,0,ip.addr==1.2.3.4 will collect SCSI SBC SRT statistics for a specific iscsi/ifcp/fcip host.

           -z sip,stat[,filter]
               This option will activate a counter for SIP messages.  You will get the number of occurrences of each SIP Method and of each SIP Status-Code.  Additionally you also get the number of resent SIP
               Messages (only for SIP over UDP).

               Example: -z sip,stat.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.  Example: -z "sip,stat,ip.addr==1.2.3.4" will only collect stats for SIP packets
               exchanged by the host at IP address 1.2.3.4 .

           -z smb,sids
               When this feature is used TShark will print a report with all the discovered SID and account name mappings.  Only those SIDs where the account name is known will be presented in the table.

               For this feature to work you will need to either to enable "Edit/Preferences/Protocols/SMB/Snoop SID to name mappings" in the preferences or you can override the preferences by specifying
               -o "smb.sid_name_snooping:TRUE" on the TShark command line.

               The current method used by TShark to find the SID->name mapping is relatively restricted with a hope of future expansion.

           -z smb,srt[,filter]
               Collect call/reply SRT (Service Response Time) data for SMB.  Data collected is number of calls for each SMB command, MinSRT, MaxSRT and AvgSRT.

               Example: -z smb,srt

               The data will be presented as separate tables for all normal SMB commands, all Transaction2 commands and all NT Transaction commands.  Only those commands that are seen in the capture will have
               its stats displayed.  Only the first command in a xAndX command chain will be used in the calculation.  So for common SessionSetupAndX + TreeConnectAndX chains, only the SessionSetupAndX call will
               be used in the statistics.  This is a flaw that might be fixed in the future.

               This option can be used multiple times on the command line.

               If the optional filter is provided, the stats will only be calculated on those calls that match that filter.

               Example: -z "smb,srt,ip.addr==1.2.3.4" will only collect stats for SMB packets exchanged by the host at IP address 1.2.3.4 .

CAPTURE FILTER SYNTAX
       See the manual page of pcap-filter(7) or, if that doesn't exist, tcpdump(8), or, if that doesn't exist, <http://wiki.wireshark.org/CaptureFilters>.

READ FILTER SYNTAX
       For a complete table of protocol and protocol fields that are filterable in TShark see the wireshark-filter(4) manual page.

FILES
       These files contains various Wireshark configuration values.

       Preferences
           The preferences files contain global (system-wide) and personal preference settings.  If the system-wide preference file exists, it is read first, overriding the default settings.  If the personal
           preferences file exists, it is read next, overriding any previous values.  Note: If the command line option -o is used (possibly more than once), it will in turn override values from the preferences
           files.

           The preferences settings are in the form prefname:value, one per line, where prefname is the name of the preference and value is the value to which it should be set; white space is allowed between :
           and value.  A preference setting can be continued on subsequent lines by indenting the continuation lines with white space.  A # character starts a comment that runs to the end of the line:

             # Capture in promiscuous mode?
             # TRUE or FALSE (case-insensitive).
             capture.prom_mode: TRUE

           The global preferences file is looked for in the wireshark directory under the share subdirectory of the main installation directory (for example, /usr/local/share/wireshark/preferences) on UNIX-
           compatible systems, and in the main installation directory (for example, C:\Program Files\Wireshark\preferences) on Windows systems.

           The personal preferences file is looked for in $HOME/.wireshark/preferences on UNIX-compatible systems and %APPDATA%\Wireshark\preferences (or, if %APPDATA% isn't defined, %USERPROFILE%\Application
           Data\Wireshark\preferences) on Windows systems.

       Disabled (Enabled) Protocols
           The disabled_protos files contain system-wide and personal lists of protocols that have been disabled, so that their dissectors are never called.  The files contain protocol names, one per line, where
           the protocol name is the same name that would be used in a display filter for the protocol:

             http
             tcp     # a comment

           The global disabled_protos file uses the same directory as the global preferences file.

           The personal disabled_protos file uses the same directory as the personal preferences file.

       Name Resolution (hosts)
           If the personal hosts file exists, it is used to resolve IPv4 and IPv6 addresses before any other attempts are made to resolve them.  The file has the standard hosts file syntax; each line contains
           one IP address and name, separated by whitespace.  The same directory as for the personal preferences file is used.

           Capture filter name resolution is handled by libpcap on UNIX-compatible systems and WinPcap on Windows.  As such the Wireshark personal hosts file will not be consulted for capture filter name
           resolution.

       Name Resolution (ethers)
           The ethers files are consulted to correlate 6-byte hardware addresses to names.  First the personal ethers file is tried and if an address is not found there the global ethers file is tried next.

           Each line contains one hardware address and name, separated by whitespace.  The digits of the hardware address are separated by colons (:), dashes (-) or periods (.).  The same separator character
           must be used consistently in an address.  The following three lines are valid lines of an ethers file:

             ff:ff:ff:ff:ff:ff          Broadcast
             c0-00-ff-ff-ff-ff          TR_broadcast
             00.00.00.00.00.00          Zero_broadcast

           The global ethers file is looked for in the /etc directory on UNIX-compatible systems, and in the main installation directory (for example, C:\Program Files\Wireshark) on Windows systems.

           The personal ethers file is looked for in the same directory as the personal preferences file.

           Capture filter name resolution is handled by libpcap on UNIX-compatible systems and WinPcap on Windows.  As such the Wireshark personal ethers file will not be consulted for capture filter name
           resolution.

       Name Resolution (manuf)
           The manuf file is used to match the 3-byte vendor portion of a 6-byte hardware address with the manufacturer's name; it can also contain well-known MAC addresses and address ranges specified with a
           netmask.  The format of the file is the same as the ethers files, except that entries of the form:

             00:00:0C      Cisco

           can be provided, with the 3-byte OUI and the name for a vendor, and entries such as:

             00-00-0C-07-AC/40     All-HSRP-routers

           can be specified, with a MAC address and a mask indicating how many bits of the address must match.  The above entry, for example, has 40 significant bits, or 5 bytes, and would match addresses from
           00-00-0C-07-AC-00 through 00-00-0C-07-AC-FF.  The mask need not be a multiple of 8.

           The manuf file is looked for in the same directory as the global preferences file.

       Name Resolution (ipxnets)
           The ipxnets files are used to correlate 4-byte IPX network numbers to names.  First the global ipxnets file is tried and if that address is not found there the personal one is tried next.

           The format is the same as the ethers file, except that each address is four bytes instead of six.  Additionally, the address can be represented as a single hexadecimal number, as is more common in the
           IPX world, rather than four hex octets.  For example, these four lines are valid lines of an ipxnets file:

             C0.A8.2C.00              HR
             c0-a8-1c-00              CEO
             00:00:BE:EF              IT_Server1
             110f                     FileServer3

           The global ipxnets file is looked for in the /etc directory on UNIX-compatible systems, and in the main installation directory (for example, C:\Program Files\Wireshark) on Windows systems.

           The personal ipxnets file is looked for in the same directory as the personal preferences file.

ENVIRONMENT VARIABLES
       WIRESHARK_DEBUG_EP_NO_CHUNKS
           Normally per-packet memory is allocated in large "chunks."  This behavior doesn't work well with debugging tools such as Valgrind or ElectricFence.  Export this environment variable to force
           individual allocations.  Note: disabling chunks also disables canaries (see below).

       WIRESHARK_DEBUG_SE_NO_CHUNKS
           Normally per-file memory is allocated in large "chunks."  This behavior doesn't work well with debugging tools such as Valgrind or ElectricFence.  Export this environment variable to force individual
           allocations.  Note: disabling chunks also disables canaries (see below).

       WIRESHARK_DEBUG_EP_NO_CANARY
           Normally per-packet memory allocations are separated by "canaries" which allow detection of memory overruns.  This comes at the expense of some extra memory usage.  Exporting this environment variable
           disables these canaries.

       WIRESHARK_DEBUG_SE_USE_CANARY
           Exporting this environment variable causes per-file memory allocations to be protected with "canaries" which allow for detection of memory overruns.  This comes at the expense of significant extra
           memory usage.

       WIRESHARK_DEBUG_SCRUB_MEMORY
           If this environment variable is set, the contents of per-packet and per-file memory is initialized to 0xBADDCAFE when the memory is allocated and is reset to 0xDEADBEEF when the memory is freed.  This
           functionality is useful mainly to developers looking for bugs in the way memory is handled.

       WIRESHARK_DEBUG_WMEM_OVERRIDE
           Setting this environment variable forces the wmem framework to use the specified allocator backend for *all* allocations, regardless of which backend is normally specified by the code. This is mainly
           useful to developers when testing or debugging. See README.wmem in the source distribution for details.

       WIRESHARK_RUN_FROM_BUILD_DIRECTORY
           This environment variable causes the plugins and other data files to be loaded from the build directory (where the program was compiled) rather than from the standard locations.  It has no effect when
           the program in question is running with root (or setuid) permissions on *NIX.

       WIRESHARK_DATA_DIR
           This environment variable causes the various data files to be loaded from a directory other than the standard locations.  It has no effect when the program in question is running with root (or setuid)
           permissions on *NIX.

       WIRESHARK_PYTHON_DIR
           This environment variable points to an alternate location for Python.  It has no effect when the program in question is running with root (or setuid) permissions on *NIX.

       ERF_RECORDS_TO_CHECK
           This environment variable controls the number of ERF records checked when deciding if a file really is in the ERF format.  Setting this environment variable a number higher than the default (20) would
           make false positives less likely.

       IPFIX_RECORDS_TO_CHECK
           This environment variable controls the number of IPFIX records checked when deciding if a file really is in the IPFIX format.  Setting this environment variable a number higher than the default (20)
           would make false positives less likely.

       WIRESHARK_ABORT_ON_DISSECTOR_BUG
           If this environment variable is set, TShark will call abort(3) when a dissector bug is encountered.  abort(3) will cause the program to exit abnormally; if you are running TShark in a debugger, it
           should halt in the debugger and allow inspection of the process, and, if you are not running it in a debugger, it will, on some OSes, assuming your environment is configured correctly, generate a core
           dump file.  This can be useful to developers attempting to troubleshoot a problem with a protocol dissector.

       WIRESHARK_EP_VERIFY_POINTERS
           This environment variable, if present, causes certain uses of pointers to be audited to ensure they do not point to memory that is deallocated after each packet has been fully dissected.  This can be
           useful to developers writing or auditing code.

       WIRESHARK_SE_VERIFY_POINTERS
           This environment variable, if present, causes certain uses of pointers to be audited to ensure they do not point to memory that is deallocated after when a capture file is closed.  This can be useful
           to developers writing or auditing code.

       WIRESHARK_ABORT_ON_OUT_OF_MEMORY
           This environment variable, if present, causes abort(3) to be called if certain out-of-memory conditions (which normally result in an exception and an explanatory error message) are experienced.  This
           can be useful to developers debugging out-of-memory conditions.

SEE ALSO
       wireshark-filter(4), wireshark(1), editcap(1), pcap(3), dumpcap(1), text2pcap(1), mergecap(1), pcap-filter(7) or tcpdump(8)

NOTES
       TShark is part of the Wireshark distribution.  The latest version of Wireshark can be found at <http://www.wireshark.org>.

       HTML versions of the Wireshark project man pages are available at: <http://www.wireshark.org/docs/man-pages>.

AUTHORS
       TShark uses the same packet dissection code that Wireshark does, as well as using many other modules from Wireshark; see the list of authors in the Wireshark man page for a list of authors of that code.



1.10.14                                                                                              2017-08-06                                                                                           TSHARK(1)